D-Tect X Releases

Release X Filter, Line Profile Measurement Markers, Void Analysis.

Mitigate the oversaturated enhancement issue introduced by X Filter.

Add auto-login online to DRIVE NDT once internet connectivity is available.

Fix potential application crash when closing device live stream frames.

Add image export functionality to Explorers dock feature.

Remove default Workspace Interaction Mode setting and instead always use the last-used mode. Remove default Continuous Drawing setting and instead always use the last-used mode.

Add SMPTE-RP133 test pattern.

Allow importing images that have a bad pixel frame.

Add support for bad pixel overlay in DDA live stream.

Fix not being able to close frames sometimes. Fix images being inverted on the workspace when certain operations are active. Add safe write for images.

Allow import of grayscale images of any bit depth.

Show image Geometric Magnification value based on the pixel spacing if applicable.

Improve Image Presets dock user interface.

Improve X-Filter enhancement.

Improve available device list and notification list functionality.

Use display unit that is explicitly selected when recovering pixel spacing. Fix line profile measurement unit combo box not updated after changing pixel spacing.

Improve user experience when device firmware is not supported.

Improve XFilter for images with noisy backgrounds.

Add feature to show the bad pixel data for DDA images as an overlay in the workspace. Add ability to choose pixel grid display (none, processed, or original pixel values).

Add a feature to threshold the pixel values and measure the void percentage in an area.

Remember toolbox section expanded/collapsed state.

Fix property views in DRIVE NDT inspection dock displaying wrong widgets.

Highlight line markers on plot when hovered. Fix 'Auto Measure' check box not unchecked when moving a line marker by clicking on plot.

Add measurement markers to measure sections of line profile annotations.

Fix D-Tect X not logging into DRIVE NDT.

Fix cursors not updating correctly on plot. Fix panning not working correctly on plot.

Monthly Stable Release (09.2021).

Add buttons to set the image SRb value from the workspace label.

Enhance hover effect of image annotations.

Add an image enhancement filter that highlights the edges in an image.

Extend Explorer dock functionality.

Remember list settings (such as sorting and view options).

Show important license status in Notifications toolbar.

Add functionality to set a pixel value threshold for applying DDA calibration.

Add a way to set the image border for DDA devices.

Show detailed notification on order load failure.

Fix displaying wrong ping state message on first time opening 'Settings' dialog.

Monthly Stable Release (08.2021).

Add new Explorer dock to replace Orders dock with better performance and functionality.

Add color picker widget to color property views which allows the user to quickly switch between two different colors.

Improve bad pixel correction speed.

Add feature to automatically apply preset to newly imported images in an order.

Add Area property for Polygon annotation and Polygon area measurement tool.

Remember last-used Profile Width setting for line profile operations.

Display appropriate icon when DRIVE NDT inspection contains local changes which are not synced with remote server.

Add geometric magnification property.

Improve notifications when image loading fails.

Add search and sorting to History dock list.

Improve image clarity in XFilter.

Allow logging into DRIVE NDT when offline.

Right mouse click on a polyline and spline will now add points.

Improve performance of image History dock.

Eliminate UI freeze on closing workspace frame.

Add handle when DRIVE NDT is enabled and DRIVE NDT session is expired.

Improve startup speed on order loading.

Monthly Stable Release (07.2021).

Show detailed notification on image load failure.

Add support for free Viewer Mode licenses.

Improve X Filter performance.

Add circle, square, rectangle and ellipse area measurement tools.

Improve software license handling with a guided wizard.

DRIVE NDT inspection dock search box searches all properties in the dock.

Add headings to DDA live stream footer.

Add polygon annotation to toolbox.

Add support for VXTD-3543DCW DDA device.

Add serial port device plugin.

Add support for adding points to the polyline and spline item on right click.

Add setting to set the default display mode for properties which are visible in the workspace label on item creation.

Hide resize handles when dragging workspace items for better usability.

Allow square and circle annotations to have a specified area.

Remove trailing zeros of milliseconds in pretty duration display. Remove leading zeros of duration with seconds only.

Save display option changes for each Operation.

Selecting an image will display the corresponding DRIVE NDT inspection in the inspection dock.

Always display property values in a simplified format in the Workspace labels.

Allow inspection to auto-update when inspection has new updates in DRIVE NDT and inspection has no local changes.

Monthly Stable Release (06.2021).

Add option to choose how each property is displayed in the workspace.

Add circle and square annotations to Toolbox.

Add default unit and view mode settings for elapsed time property.

Adds a pretty view option to elapsed time properties which allows viewing and entering the duration in hh:mm:ss.zzz format.

Add continuous drawing mode.

Add a basic and advanced view for properties.

Add configuration for DRT panel plugin allowing panel model selection.

Active pixel spacing will be set to the calibrated pixel spacing when applying presets or states with calibration.

Add workspace item label interactive buttons.

Monthly Stable Release (05.2021).

Add feature to allow manual registration of CR 35 Plus scanners.

Add feature for direct editing of properties in the workspace via interactive item labels.

Add functionality to set a default unit for each property model.

Read X-ray parameters (Tube Voltage, Tube Current, Exposure Duration) from DICOM attributes into D-Tect X image properties.

Add more search keywords to Toolbox dock.

Add experimental support for Vieworks VXTF4343FB DDA panel.

Monthly Stable Release (04.2021).

Set image pixel spacing to Calibration Pixel Spacing only on user input of calibration length.

Fix Add Order dialog unique name validation.

Enhance SRb plot.

DDA livestream user interface improvements.

Add checkbox to allow workspace item custom properties to be shown in the corresponding workspace label.

Prevent name label from stealing focus from property input in workspace properties dock.

Add selection modes for Automatic Duplex IQI detection.

Add improved error reporting UI for GPU acceleration.

Ensure creation of DICOM protocol-compliant images.

Preserve DDA calibration data for respective binning modes.

Fix application not loading DRIVE NDT inspections as D-Tect X orders on login.

Add Minimum and Maximum properties for ROI Statistics operation.

Monthly Stable Release (03.2021).

Fix some timestamps being saved in local time instead of UTC.

Add imported image state for imported images.

Add additional acquisition properties to device acquired images.

Disable opening of line profile-associated docks on image loading.

Fix missing superscript 2 in 'Area Property View' units combo box.

Add device metadata to acquired images imported to orders.

Make text annotation always readable regardless of the image rotation or flip.

Add dock for Automatic IQI Detection operation.

Add units selection for Size and Point properties.

Add feature to automatically import images to an order from a watched folder.

Optimize DRC panel 'Low Sensitivity' acquisition mode.

Allow a custom Orders folder to be specified in the settings.

Add Continuous Wall Thickness Line plot to dock.

Fix transparent circular loading views not being centered correctly.

Monthly Stable Release (02.2021).

Improve performance of Orders dock when many items are present.

Add multi-editing functionality for image 'Isotope Activity' property.

Update image thumbnail on close to reflect current workspace state.

Only show applicable scan modes for ScanX Discover HR/HC scanners.

Add automatic duplex wire IQI detection.

Add in-built DDA acquisition modes.

Add button to toggle the visibility of all workspace items.

Add 'Escape' key shortcut to exit drawing items. Remove 'Escape' key shortcut to deselect all frames. Fix 'Escape' key shortcut not normalizing all frames when a frame is maximized.

Improve Non-Interactive Mode usability.

Add saturation image stage to DDA bad pixel calibration acquisition.

Fetch and load non-active DRIVE NDT inspections as D-Tect X orders.

Improve noise reduction in X Filter.

Monthly Feature Release: Image Exposure Parameters, Image Operation Presets, YXLON Smart RS-232 X-ray Control, Enhanced Device Image Saving, Improved Workspace Properties Dock, Remember Workspace Appearing Settings, Advanced SRb Tool Features.

Add support for DRC 1024 NDT 2x2 binning mode.

Fix multi-dragging and multi-drawing bugs.

Add feature to remember last-used Workspace appearance settings when creating new items.

Add workspace item and label properties switching. Enable label heading display toggling.

Add Median pixel value calculation to Statistics tool.

Optimize CR scan processing.

Add operation to measure wall thickness continuously along a straight line.

Improve readability of property names in lists.

Improve multi-scene drawing behavior and add multi-dragging of graphics items.

Optimize CR 35 USB default scan parameters.

Add default image SRb and Pixel Spacing to Order and allow an image name to be specified before saving CR and DDA images.

Add support to control YXLON SMART X-ray sources via RS-232.

Add support for FujiFilm Dynamix SK CR scanner.

Allow deleting multiple operation presets and add keyboard shortcuts.

Add feature to fetch DRIVE NDT open inspections and load them as D-Tect X orders.

Add workspace footer for action hint display.

Improve application menu bar organization.

Remove line angle optimization from the default SRb tool and add the 'Advanced SRb Tools` feature toggle.

Show busy indicator in UI when saving acquired CR scanner images.

Allow renaming image operation presets.

Add multi-editing functionality for image 'Pixel Spacing' property.

Add feature to login to DRIVE NDT.

Run application shutdown on separate thread to prevent Windows "application not responding" warning.

View profiles can now be added through the menu instead of the dialog.

Allow Workspace dock to be undocked and moved.

Internal update to DRT DDA device plugin.

Add hover effects for image annotations. Allow annotation dragging in Selection Interactive Mode.

Remove Windows SmartScreen warning when running D-Tect X installer.

Allow expanding and collapsing image operation presets.

Allow deleting image operation presets.

Add spline annotation.

Monthly Feature Release: Image States, Multiple Image Plate CR Scanning, Custom Text Properties, CNR Tool, Scan X Discover CR Scanner Support.

Reduce X Filter CPU computation time.

Add icons list to describe operation presets.

Allow renaming custom text properties.

Cache DDA calibration data instead of reading from disk every frame.

Add ability to delete custom text properties.

Allow adding image states from the menu.

Add support for BioSensTech duraSCAN 1417 DDA panel.

Add additional properties related to the exposure.

Change default Basic Spatial Resolution unit from mm to um.

Add dock tab flashing on creation.

Add more parameters related to gamma and X-ray sources.

Add improvements to Vieworks panel acquisition.

Allow adding and applying image operation presets.

Improve annotation label descriptiveness.

Add support for Vieworks VXTF-2532EBH dynamic DDA panel.

Add progress bar when loading the Properties docks.

Add scanning capability for ScanX Discover CR scanners.

Automatically switch distance property units to mm when pixel spacing becomes defined.

Add Contrast-to-Noise Ratio (CNR) tool.

Change line's selection bounds to use a rotated rectangle.

Allow renaming view profiles from the menu.

Allow renaming image export presets from the menu.

Allow adding custom string property fields.

Add progress overlay when switching between image states.

Allow renaming image states.

Add user interface improvements to DDA live stream.

Add functionality to enable/disable the CR scanner erasure lamp via a button in the device frame footer.

Add various user interface cosmetic improvements.

Allow deleting image states.

Improve multiple image plate scanning user interface.

Only allow D-Tect X installer to be run on Windows 10 and higher (older Windows versions are not supported).

Add multiple image plate CR scanning.

Add function to create image states.

Add setting to change how frequently software updates are available.

Add allow user to set source isotope name to an order image.

Add a separate color property for annotation fill.

Persist manual measurements on Wall Thickness and Pipe Calibration docks.

Allow CR Scan Mode and DDA Frame Time to be changed from the device footer.

Add color property to annotations.

Add inline completion of pipe diameters to pipe calibration length field in Pipe Calibration Dock.

Add various user-interface cosmetic enhancements.

Add support for Varex XRD 3025 DDA panel.

Add button to run automatic detection in Wall Thickness dock and Pipe Calibration dock.

Change Image Pixel Smoothing setting to be disabled by default.

X Filter improvements.

Remove the icon from pixel spacing property views in Line Profile docks.

Remove the accompanying coordinate labels shown when drawing image annotations.

Add pipe diameter calibration tool.

Make property views vertically align with each other.

Only notify once on the attempt to use deleted calibration data.

Improve CR 35 scan stability.

Allow renaming view profiles.

Fix DDA device mean pixel value percentage display.

Add reset button for custom pixel spacing property view.

Add new Help menu item to open website to request new features.

Allow deleting view profiles.

Only calibrate image data during DDA panel acquisition (e.g. calibration is not performed on corners of DR 7 sensor).

Make 16-bit the default channel depth for TIFF and PNG export.

Display property group titles in annotation labels.

Add ROI statistics tool.

Allow exporting image metadata as a JSON file together with exported images.

During DDA image acquisition, only use calibration files which were acquired at the same device gain.

Add user setting for default SNR annotation type.

Add basic view profiles functionality.

Add WLAN support for DRA panels.

Add support for ARGB hex color code input format for color property view.

Add vertical resizing to line profile plots.

Add calibration line operation docks.

Allow Frame Count to be changed from default when performing panel calibration.

Add reset button for size property view and font property view.

Restore view when application starts from the last view state if it exists.

Preserve current plot view when manual measurement markers are moved in the wall thickness plot.

Add support for DRA and DRP flat panel detectors (via LAN interface).

Render plot while panning for Line Profile and Wall Thickness Docks.

Add dock cosmetic improvements.

Add manual measurement of wall thickness to the wall thickness dock.

Remove docks and toolbars visibility settings.

Add reset button for number property view and angle property view.

Add polyline annotation.

Add rename order/image functionality to Order dock right-click context menu.

Add pixel spacing warning overlay on images without pixel spacing.

Improve image export presets description.

Add setting to enable/disable display image pixel smoothing.

Automatically set the display Length unit for Ruler operation to 'mm' if pixel spacing is available.

Add, search, sort and lazy loading to operations history dock.

Extend plot axes of Operation docks to meet plot area limits.

Fill only between the wall boundary markers for wall thickness graphics items.

Add image crop operation.

Add reset button for string property view and name property view.

Add search and sort to Toolbox dock.

Expand and collapse buttons in operation dock headers respond to search results.

Add expanders to Wall Thickness and Line Profile Dock sections.

Add reset button for point property view.

Add (HD-)CR 35 USB scanner support.

Create dock for corresponding wall thickness operation.

Allow renaming image export presets.

Allow line profile plot to be zoomed.

Change DICONDE image export functionality to export the original pixel data and metadata separately.

Improve license activation stability.

Add image export presets menu to the main toolbar.

Set pixel spacing to calibrated one on calibration line operation creation.

Add profile thickness property to the wall thickness operation.

Add reset button for distance property view.

Set pointing hand cursor to non-movable graphics item on mouse hover.

Allow saving offset stage data of multi-stage calibration.

Constrain ellipse interactable area to the ellipse shape.

Allow importing and replacing existing order images.

Calibration icons and live stream display image reflect the calibrations applied during multi-stage calibration acquisition.

Allow exporting images as DICONDE and fix image depth initial value bug.

Properly handle singular and plural strings in English user interface.

Allow editing Image Export presets.

Allow deleting image export presets.

Ignore toast notifications initialization failure at application startup.

Add Polish language.

Image Export presets improvements and fix preset saving.

Fix reading calibration data before writing is completed.

Add resizability and movability properties for image annotations.

Add image axes indicator to image footer.

Allow CR scanning to be stopped while scan is in progress.

Add image export presets.

Add several minor UI cosmetic improvements.

Add DRC 2430HE NDT device support.

Improve CR scan processing performance for large images.

Add ROI Windowing operation.

Add CR43 NDT CR scanner support.

Improve DRT DDA device live stream performance by using a separate thread.

Add options to export images as grayscale, and export in either 8-bit or 16-bit depth.

Allow firmware files for CR35 and DRT devices to be downloaded.

Add text descriptions to Pixel Spacing properties to clarify usage.

Using new faster, more flexible publishing platform.

Add start/stop buttons to DDA and CR scanner live stream frames.

Import metadata when importing DICOM images generated by D-Tect X.

Allow drawing multi-image graphics operations when drawing on a non-selected image.

Display drawing graphics during multi-image operations.

Add selection indicator for image pixel spacing property. Fix image calibration for right-angled calibration lines.

Scale the appearance of annotations in exported images to screen resolution.

Add simultaneous pinch rotate and pinch zoom on multiple images.

Create a selectable Pixel Spacing property under the order image properties.

Add Line Profile dock name property and change Line Profile dock title accordingly.

Ensure Line Profile graphics item stays visible when in view.

Add unit combo box to area property views.

Set the interaction mode from a user-defined setting when the application starts.

Allow CR device scanning to be stopped when in the waiting for image plate state.

Show Line Profile dock ID label alongside graphics item in Workspace.

Add BMP image export function.

Add TIFF image export function.

Add PNG image export function.

Add additional calibration DICOM attributes to .dcm file.

Redesign live stream text overlay so that each item can resize independently.

Add image export summary page.

Add helper orthogonal lines for Line Profile operation and SRb operation.

Allow image export from the Main toolbar and File menu.

Add bad pixel calibration function for DDA devices.

Add calibration line operation for setting image pixel spacing information.

Group the device properties displayed in the Properties tab of each device.

Modulation plot is no longer disabled when duplex wire IQIs are no longer detected by SRb operations.

Add setting for display image photometric interpretation.

Ensure proper image display based on its DICOM photometric interpretation.

Improve CR 35 scanning stability.

Add JPEG image export.

Add ISO fixed-size rectangle (20x55) as option for the SNR tool.

Improve stability of CR 35 device image acquisition.

Display row and column pixel spacing information.

Show license owner information in loading splash screen.

Change select images buttons in Orders dock to a drop-down menu.

Separate toolbox view for zooming images.

Update installer translations.

Additional buttons to select all images in workspace and to select selected images in workspace.

Add BCG adjustment via mouse click and drag on image in Non-Interactive mode.

Allow D-Tect X Software License Agreement file to be opened directly from Share Image dialog.

Add Image Share functionality.

Grouped all properties in a DRIVE NDT inspection.

Add functionality to set Gain and Binning Mode for DR 7 and DRC panel devices.

Save additional properties in images from CR scanners: pixel spacing, pixel intensity relationship sign, bits stored and samples per pixel.

Add function to collapse or expand all property groups.

Add property search functionality.

Add description tooltips to properties.

Add more property groups.

Improve CR 35 device search functionality.

Add property groups.

Change annotation resize handles to have a fixed display size.

Add plugin data download functionality.

Ensure live preview frame cannot be closed while CR scanning or DDA acquisition is in progress.

Add Workspace dock keyboard shortcuts.

Add Bulgarian translation to installer.

Improve text size of annotation property labels.

Add contextual selection to Orders dock when using Control + A (select all).

Add an indicator/cursor point for multi-select mouse actions in images.

Installer automatically adds exception for D-Tect X to Windows Firewall.

Show gray values in multiple image by holding Shift key.

Add Chinese (Simplified) translation to installer.

Add multiple image fit to view functionality via keyboard (using SHIFT key and double right-click).

Improve line-based annotations selection area.

Add multiple image pan when Shift key is held.

Change workspace cross cursor color to blue and use a different cursor when drawing.

Add keyboard shortcuts for Orders dock.

Add editable boolean property.

Add French translation to installer.

Add Croatian translation to installer.

Live preview speed optimization for CR Scanner devices.

Add Korean translation to installer.

Synchronize DRIVE NDT inspections.

Improve device status display.

Reduce application installer file size.

Read orders from DRIVE NDT.

Prevent application from being closed while images are being imported to orders (warning message dialog is shown).

Added a comment property for all operations.

Add zoom functionality to histogram plot.

Persist the SNR annotation.

Persist the Text annotation.

Make Line Profile IQI wire pair markers more readable.

Persist the Ellipse annotation.

Improve reading and writing speed of image metadata.

Persist the Rectangle annotation.

Add various device-related improvements and fixes.

Improve image metadata reading and writing speed.

Improve X Filter processing speed.

Display interpolated polynomial to Line Profile modulation plot.

Add menu action to reset the application view to default.

Improve sizing of DDA and CR scanner device live stream footer when there is limited space.

Add view filter to Operations dock to show only active operations.

Persist Wall Thickness annotation.

Persist SRb annotations.

Add basic scan mode selection for CR scanners.

Improve initial placement of annotation properties label.

Only apply DDA offset calibration if the Frame Time matches.

Persist Line Profile Annotations.

Allow loading of external correction files for DRC and DR 7 DDA devices.

Show busy indication while restoring the state of an image after adding to the Workspace.

Show more license information in Software License dialog.

DR 7 NDT device: Use blank correction file.

Enhance DR 7 NDT device acquisition for all frame times.

Fix rectangular resizer item handles position.

Disable revert image state buttons when image processing is in progress.

Allow DR 7 DDA device frame time to be set via user interface.

Indicate which calibrations could not be applied in DDA device live stream footer.

Show results of SRb, SNR and Wall Thickness operations next to annotation.

Add raw image acquisition mode for DDA devices.

Fix DDA device gain and offset calibration.

Fix Text annotation text editing.

Add warning alarms for device status during live stream.

Persist images and orders properties.

Add Properties tab to Device docks.

Allow Pixel Spacing property to be edited if not supplied by a device.

Limit line annotation length to scene while drawing

Load blank calibration files for DRC panel devices.

Add basic CR 35 device image acquisition.

Save pixel spacing data to order image when acquiring images from DDA devices.

Improve button behavior in Notifications dock.

Add new languages: Serbian, Slovene, Bulgarian

Improve notifications bar look and functionality.

Add message text overlay to live stream view.

Add CR Scanner device footer in live stream view.

Add new languages: Turkish, Croatian

Allow text annotation font size and color to be edited.

Allow setting of integration time for DRC panel devices.

Always use the latest performed calibrations for DDA devices.

Add buttons in Workspace frames to reset the image state to original.

Add basic panel device calibration (offset and gain) functionality.

Improve localized timestamp display.

Improve X Filter processing speed.

Add basic DDA device frame acquisition and saving result image to order.

Display additional information in Software License dialog: maximum activations, activations used, license features.

Add angle property view.

Add rotation operation to image operation history.

DRC 2430 NDT device driver: Set config INI defaults.

Add unit to pixel spacing property views.

Improve line profile dock switching behavior.

Add DRC device basic live stream.

Add a connecting line between annotation items and their properties in the Workspace.

Change DRC 2430 NDT device driver to use ProgramData for log and configuration files.

Prevent device closing during acquisition.

Add SRb modulation plot to Line Profile dock.

Add ability to show properties alongside annotations in Workspace.

Add ruler annotation.

Keep Line Profile dock open when SRb analysis is applied.

Improve property view style.

Add icon and File menu item for Add New Order.

Add DR 7 NDT device live image preview.

Improve text tool button style.

Distance property views show values to 5 significant figures if there are decimal values. Added micron and foot to unit list.

Create dock when opening an available device.

Allow SRb analysis to be applied on line profiles.

Improve handling of dock switching on runtime dock close.

Make all non-editable property fields have a dark background.

Reorganize dock layout and optimize dock sizing at application start.

Add line properties to Line Profile dock.

Add (HD-)CR 35 Plus device search functionality.

Add background color for loading overlays.

Restrict SRb property display to appropriate units.

Allow multiple Line Profile docks to be opened simultaneously.

Fix checkbox styling.

Allow changing angle for line-based annotations via Properties dock.

Add grid lines to Line Profile plot.

Add additional device status information in Available devices list.

Do not move the annotation when editing a point via the Properties dock.

Allow 'X Distance' and 'Y Distance' properties in line-based annotations to be changed via the Properties dock.

Brightness, Contrast & Gamma operation list item selection changes now update their corresponding widgets in the Toolbox dock.

Allow ellipse annotation major and minor axes lengths to be changed via the Properties dock.

Add functionality to change the length of line-based annotations via the Properties dock.

Store Order and Image-related timestamps in UTC and display them in local format in Properties dock.

Add multiple order and image renaming in Orders dock.

Add DRC 2430 NDT panel device detection functionality.

Add checkbox to invert Line Profile plot.

Show full paths in Order and Image file path properties.

Update Histogram dock when selected Windowing operation changes in Operations dock list.

Add Line Profile plot.

Allow changing dimensions of rectangle and SNR annotations.

Allow changing annotation position via workspace properties.

Make all timestamp displays the same format throughout application.

Clear search filter after adding new order or image in Orders dock.

Add dock for line profile annotation.

Add device search functionality for DR 7 NDT and Array 2905 devices.

Allow image footer data in Workspace to be customized.

Add distance property view.

Add rename image functionality to Orders dock.

Add Line Profile Tool to Analysis Toolbox.

Change slider values in Toolbox via mouse wheel only if it is first clicked.

Change spin box values in Toolbox via mouse wheel only if it is first clicked.

Add editable number property view.

Allow changing histogram window via resize handles.

Remove "Processing" text from Operations dock.

Highlight annotation on mouse hover when interacting with annotations.

Eliminate flicker in Operations dock list when operation updates.

XFilter: Improve uniform contrast across the image.

Add histogram windowing range reset button to Histogram dock.

Add more detailed information to order-related Toast notifications.

Add icon to indicate thumbnail loading state in Orders dock.

Use icons to indicate empty orders in Orders dock.

Allow histogram window setting via mouse left-click and drag.

Add Windows toast notifications for order-related actions.

Change Duerr NDT icons to open dtectx.com website when clicked.

Update VC++ redistributable to latest.

Add Workspace interaction modes.

Expand newly-created orders in Orders dock.

Add icon in Orders dock to indicate when an image is opened in the Workspace.

Add button in Orders dock to create an order if there are no orders.

Add icons in Orders dock to indicate when an image has been copied or cut.

Fix Operations dock update.

Add dialog confirmation before deleting orders containing images.

Make scroll bar styling match rest of application.

Add image copy/cut and paste to Orders dock.

Add Text annotation to Toolbox.

Add Ellipse annotation to Toolbox.

Add expand/collapse all buttons to Toolbox dock.

Only the last applied Filter, Brightness, Contrast, Gamma and Windowing items in the Operations dock are checked/enabled.

Add snap-points to sliders in toolbox.

Add clear button to search box text inputs.

Change 'Pixel Size' property name to 'Pixel Spacing'.

Add message in status bar if GPU driver is unsupported.

Use transparent background for image thumbnails in Orders dock.

Improve stability of dock moving via drag-and-drop.

Add multi-image BCG functionality.

Set application font size to match Windows default (9 pt).

Added separate Operation list entries for Brightness, Contrast and Gamma.

Add close button to all tabbed docks (not just the active dock tab).

Improve support for Windows display scalings and add digital signature to application executable.

Improve X Filter functionality.

Add multi-image zoom and rotate.

Add delete image functionality to Orders dock.

Load all orders before loading their images.

Prevent multiple application instances from running at the same time.

Improve software license handling.

Annotation selection is performed exclusively across frames in workspace.

Add function which allows adding all images of selected orders to workspace via the right-click menu in the Orders dock.

Add open image in workspace function to right-click menu in Orders dock.

Fix crash when using SRb and Wall Thickness tools.

Add import image function to right-click menu in Orders dock.

Select items in Windows Explorer when using the 'Show in Explorer' function in the Orders dock.

Choose an appropriate resize handle size based on image dimensions and zoom factor.

Add 'Show in Explorer' function to right-click menu in Orders dock.

Allow orders to be opened in Windows Explorer via the right-click menu in the Orders dock.

Add selection information to right-hand click menu in Orders dock.

Add order creation via right-click menu in Orders dock.

Improve XFilter implementation.

Allow image import from 'File' menu.

Allow workspace graphic items to be resized.

Do not show time taken in Operations dock for annotation operations.

Add a setting for the application to automatically use the system language.

Add setting to enable/disable the automatic software check.

Redesign Orders dock.

Indicate in Settings dialog which settings require an application restart.

Embed image metadata into DICOM file.

Improve accuracy of interpolated SRb calculations.

Persist existing DICOM tags.

Add Removing Annotations from Images in the Workspace.

Add threads configuration settings.

Improve image processing performance.

Fix user-interface styling.

Combo boxes in Settings dialog no longer change if hovered during mouse scrolling.

Fix toolbox Rotation slider and Zoom slider functionality.

Add Pixel Size and Basic Spatial Resolution image properties.

Add Czech language setting.

Add `Modified` timestamp property for orders and images in Orders dock.

Improve Histogram windowing UI responsiveness.

Improve item selection in workspace frames.

Add rotation slider to toolbox and rotation via pinch touch gesture.

Expand order in Orders dock when a containing image matches the search.

Add SRb tool.

Add function to enable/disable operations via the Operations dock.

Add basic Wall Thickness tool.

Add multi-image zoom functionality.

Show available device drivers in Devices dock.

Add trial license functionality.

Add properties dock for workspace graphic items.

Add zoom functionality to toolbox.

Allow images and orders to be deleted in the Orders dock using the keyboard.

Exclusively select image if maximized in workspace.

Add GPU acceleration for BCG image adjustment.

Add SNR measurement tool to toolbox.

Only show workspace header if there are frames.

Languages update: add French translation and new UK English option.

Add more image details in Orders dock.

Run image import on threads.

Add Properties dock for Orders and Images.

Add more information to Operations dock.

Add different histogram plot types for improved data display.

Add application notifications to the toolbar and to a dedicated dock.

Add rectangle annotation to toolbox.

Add error messages if Orders or Images can't be shown in Windows Explorer.

Add image windowing operation to toolbox.

Improve software licensing functionality.

Optimize order and image deletion handling.

Add cut and copy order images functionality.

Add Operations dock to display image operations history.

Add order rename functionality.

Add image rotate operations to toolbox.

Show image index in workspace when maximized.

Add auto-zoom on load, maximize and normalize settings.

Add vertical flip operation to toolbox.

Allow GPU acceleration to be enabled or disabled.

Change busy indicator appearance.

Implement order and image deletion.

Implement image BCG toolbox operations.

Add one-finger swipe touch gesture to cycle through images on workspace.

Add image inversion function in toolbox.

Add additional user interface language settings.

Style the BCG controls in the toolbox.

Improve look and feel of Orders dock.

Update offline license URLs in License dialog.

Improve application docking system.

Improve performance of BCG image adjustment.

Use new offline licensing URLs in License dialog.

Allow importing of images with the same filename to an order.

Remove metadata functionality from orders.

Add fit image to view button in workspace.

Add 'Show in Explorer' functionality for images in orders.

Display total number of images in workspace header.

License handling improvements.

Use language setting from configuration.

Add DriveNDT settings.

Add zoom level to permanent image footer.

Add order image selection and opening.

Add Image Importing to Orders

Double-clicking the histogram will reset the window range.

Redesign workspace header and multi-selection behavior.

Style the default button in dialogs in a different color.

Add image BCG (brightness, contrast, gamma) adjustment controls to toolbox.

Add icons for image filter buttons in toolbox.

Run image filter operations on background threads.

Add jumping to sections in Settings dialog.

Calculate histogram for currently selected image.

Style the toolbox.

Online license checks will timeout after 5 seconds if there is no network connectivity.

Style the search box in the Settings dialog.

Add image footer to display cursor coordinates, pixel value and load/calculation times.

Store application settings in local file.

Support non-ASCII characters in Order data file.

Add dock and toolbar visibility to Settings dialog.

Update German user-interface translation.

Implement Order selection.

Rename "Job" to "Order".

Style the application "Release Notes".

Style the application settings dialog.

Add job creation functionality.

Ship application with "Release Notes" (describing the changes in each released version).

Unload device and image filter plugins on application close.

Add software "About" dialog.

Add offline license activation and deactivation.

Add support for Bitmap image decoding.

Add disk/storage space information to status bar.

Add logging to local file.

Add initial Japanese user interface translation.